PRODUCT DESCRIPTION:
AWS: A5.14
Conforms to Certification: AWS A5.14 ASME SFA A5.14
Weld Process: GMAW & ASAW Welding Processes
ERNiCrMo-10 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels. Can be used to weld duplex, super duplex stainless steels.
AWS Chemical Composition Requirements
| C = 0.015 max | Cu = 0.50 max |
| Mn = 1.0 max | Ni = Remainder |
| Fe = 3.0 max | Co = 2.0 max |
| P = 0.04 max | Cr = 14.0 - 18.0 |
| S = 0.03 max | Mo = 14.0 - 18.0 |
| Si = 0.08 max | W = 0.50 max |
| Other = 0.50 max | Ti = 0.70 max |
PLEASE CALL FOR MORE INFORMATION AND AVAILABLE SIZES:
Application
ERNiCrMo-7 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys and for cladding steel with NI-CR-MO weld material
PRODUCT PARAMETERS:
| Deposited Chemcial Composition % (Typical) | ||
| C = 0.01 | Cr = 16.5 | Ni = Balance |
| Fe = 2.20 | Mo = 15.75 | |
| Deposited All Weld Metal Properties % (AW) | ||
| Tensile Strength | 113,00 psi | |
| Elongation | 29% | |
DEPOSITED CHARPY-V-NOTCH IMPACT PROPERTIES:
Not applicable
| Recommended Welding Parameters for MIG and SAW Welding of Nickel Alloys | ||||
| Process | Diameter of Wire | Voltage (V) | Amperage (A) | Gas |
| MIG | .035 inches | 26 - 29 | 150 - 190 | 75 % Argon +25% Helium |
| .045 inches | 28 - 32 | 180 - 220 | 75 % Argon +25% Helium | |
| 1/16 inches | 29 - 33 | 200 - 250 | 75 % Argon +25% Helium | |
| SAW | 3/32 inches | 28 - 30 | 270 - 350 | Suitable Flux May Be Used. |
| 1/8 inches | 29 - 32 | 350 - 450 | Suitable Flux May Be Used. | |
| 5/32 inches | 30 - 33 | 400 - 550 | Suitable Flux May Be Used. | |
