Nickel Alloy Welding Wire Tig Wire ENiFe-CI
| Standards |
| EN ISO 1071 – SC NiFe-1 |
| AWS A5.15 – E NiFe-CI |
Features and Applications
Ferro-nickel solid wire used for welding cast iron and ductile iron.
Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels.
Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings.
Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc.
Typical Base Materials
Grey cast iron, malleable, nodular*
* Illustrative, not exhaustive list
| Chemical Composition % | ||||||
|
C% |
Mn% |
Si% |
P% |
S% |
||
|
max |
max |
max |
max |
max |
||
|
2.00 |
0.80 |
0.20 |
0.03 |
0.03 |
||
|
|
|
|
|
|
||
|
Fe% |
Ni% |
Cu% |
Al% |
|
||
|
rem. |
54.00 |
max |
max |
|
||
|
|
56.00 |
2.50 |
1.00 |
|
||
| Mechanical Properties | ||
| Tensile Strength | 400 – 579 MPa | |
| Yield Strength | - | |
| Elongation | - | |
| Impact Strength | - | |
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.
Shielding Gases
EN ISO 14175 – TIG: I1 (Argon)
Welding Positions
EN ISO 6947 – PA, PB, PC, PD, PE, PF
| Packaging Data | |||
|
Diameter |
Length |
Weight |
|
|
1.60 mm 2.40 mm 3.20 mm |
1000 mm 1000 mm 1000 mm |
5 Kg 5 Kg 5 Kg |
|
Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.
Related Products
-
Nickel Alloy Welding Wire ERNiCrMo-3 Tig Wire
-
Nickel Alloy Welding Wire ERNiCr-3 Nickel Tig W...
-
Nickel Alloy Welding Wire ENiFe-Cl Mig Welding ...
-
Nickel Alloy Welding Wire ERNiCu-7 Nickel Tig W...
-
ERNiFeCr-1 Nickel Alloy Welding Wire, Nickel Ti...
-
Nickel Alloy Welding Wire ERNi-1 Nickel Tig Wir...